Solas Rafts System

 
 

Operating head DK99

Thanner new series of ISO approved Operating heads DK99 offer a wide range of options. Outlets 1-4 and with either thread or for 14 mm banjo connection. With or without clamping for vacuum packing. The body of the operating head is made from brass, top screw and connections are also from brass. Nickel plated versions are available for rafts made from rubber coated fabrics
 
DK99 series is approved to handle CO2, Nitrogen and compressed air up to 300bar. To release DK99 a pull of app. 100N is required in directions 360° round and 0° to 90° in line.
 
Approval: FDC-Thanner-ISO 15738-009
 
Operating head DK99

DK99S-1x3/8" BSP   Part no. 99-015

DK99S-2x3/8" BSP   Part no. 99-000

DK99-2x3/8" BSP      Part no. 99-078

DK99S-V-1x3/8" BSP   Part no. 99-021/99-058 for vacuum clamping

DK99S-V-2x3/8" BSP   Part no. 99-160/99-058 for vacuum clamping
 

Cylinder adapter DK99S

The new ISO/TPED approved cylinder adapter DK99S is made from brass and holds the standard Thanner membrane holders also used in the DK94/ Compact series. This cylinder adapter can also be used for DK94. Membrane holders suitable for cylinder chargings up to 300bar available from stock.

Approvals:

FDC-Thanner-ISO 15738-010   TPED DK-0200-5.002.2.1/02    TPED DK-0200-5.002.2.2/02
 
Cylinder adapter

Cylinder adapter with syphon tube for Co2 chargings

Part no. 99-121
 
Cylinder adapter for compr. Air and N2 chargings

Cylinder adapter for compr. Air and N2 chargings  

Part no. 99-128
 
Pressure Relief valve OTS-65

Pressure Relief valve OTS-65

Part no. 65-008
 
Inflation valve Mark III

Inflation valve Mark III

Part no. 005-973
 
Inflate/deflate valve

Inflate/deflate valve

Part no. 45-042
 
 
 
For further information and system use "Contact us"